Chevrolet Performance Ram Jet 350 Crate Engine
- 345hp @5,000 rpm/396 lb.-ft. @3,600 rpm
- Vortec cylinder heads
- Cast-iron block with 2-bolt main caps
- Perfect for a resto-mod hot rod!
Ram Jet 350 Crate Engine
345 hp @ 5,000 rpm / 396 lb.-ft. @ 3,600 rpm
Ram Jet 350 Tech Specs:
Engine Type: Chevy Small-Block V-8
Displacement (cu in): 350
Bore x Stroke (in): 4.000 x 3.480
Block: Cast-iron with 2-bolt main caps
Crankshaft (P/N 10243070): Cast-iron
Connecting Rods (P/N 10108688): Powdered metal steel
Pistons (P/N 12571703): Hypereutectic aluminum
Intake Manifold (P/N 12498032): Ram Jet PFI design
Camshaft Type (P/N 14097395): Hydraulic roller
Valve Lift (in): .431 intake / .451 exhaust
Camshaft Duration (@.050 in): 196° intake / 206° exhaust
Cylinder Heads (P/N 12528913): Vortec iron; 64cc chambers
Valve Size (in): 1.940 intake / 1.500 exhaust
Compression Ratio: 9.0:1 nominal
Rocker Arms (P/N 19210729): Aluminum roller style
Rocker Arm Ratio: 1.5
Recommended Fuel: Premium pump
Ignition Timing: 34° Total @ 4,000 rpm
Maximum Recommended rpm: 5,200
Recommended Transmission: Hydra-Matic 4L65-E Four-Speed Automatic P/N 19260380 or the T56 Super Magnum 6-Speed Manual Transmission P/N 13929795 (for a complete Powertrain System feturing the Ram Jet 350 and T56, see the Connect & Cruise Ram Jet 350 kit.
– Comes with externally balanced, manual transmission flywheel; change to externally balanced flexplate for automatic transmission applications.
– Installer to supply 12-volt power source and fuel
– Not intended for marine applications
– IMPORTANT! For a safe, proper and trouble-free engine break-in, the MEFI 4 computer has a “green” mode that controls rpm during the break-in period. During this period, engine speed is limited to 4,000 rpm in the first hour, 4,500 rpm in the second hour and 5,500 rpm in the third hour.
Note: Distributor with melonized steel gear MUST be used with long blocks and partial engines with steel camshafts, or engine damage will occur.
Replaces old P/N 12499120 and P/N 19355815.
Ram Jet 350 Crate Engine
19417619 Chevrolet Motor
Vintage Style and Modern Performance
Chevrolet Performance‘s unique Ram Jet 350 combines the classic look of the original Rochester “Fuelie” mechanical fuel injection system with the dependability and optimized performance of contemporary port fuel injection. It’s the perfect combination for a resto-mod hot rod.
The GM cast-iron engine block is matched with a durable rotating assembly that delivers a pump-gas-friendly 9.0:1 compression ratio, as well as a smooth hydraulic roller camshaft that complements power delivery with a great idle quality. The engine’s unique intake manifold and plenum is 9.75 inches tall, offering plenty of clearance to fit under the hood of your street rod, muscle car or truck without modifications.
The Chevy Performance Ram Jet 350 crate engine kit includes a MEFI 4 engine controller, wiring harness and a detailed instruction guide to make adding this retro-style EFI system a complete DIY project. Additional components are required, including a high-pressure fuel pump and front-end accessory drive system.
This part replaces old P/N 19355815.
Chevrolet Performance Crate Engines include a 24-month or 50,000-mile (80,000 kilometer) limited warranty.
This product qualifies for Free Mobil 1 Oil!
November 1, 2020 through February 28, 2021 receive a Free case of Mobil 1 Oil with the purchase of a Chevrolet Performance Crate Engine and receive two Free Cases of Mobil 1 Oil with the purchase of a Connect & Cruise Package.