347CI Small Block – BluePrint Engines Small Block Ford 347CI Stroker Long Block Crate Engine


This Ford 347 Stroker Crate Engine is a great option if you’re looking for more power from your small-block Ford. Available from BluePrint Engines it comes with aluminum heads and a hydraulic roller camshaft. It also features:

  • HP & Torque: 415 HP / 415 FT-LBS
  • Compression Ratio: 10.0:1
  • Aluminum Heads
  • Hydraulic Roller Cam
  • Cast Steel Crank
  • Forged Pistons

Available on backorder

Shipping is free, but there is a delivery fee for residential addresses.

SKU: BPEBP3474CT Category:

347CI Stroker Crate Engine

Available from BluePrint Engines, this 347 stroker is based on the small block Windsor and comes with aluminum heads and a hydraulic roller camshaft. This Ford 347 Stroker Crate Engine is a great option if you’re looking for more power from your small-block Ford. It has 415 hp and 415 ft. lbs. of torque and also features:

  • 385 hp @ 5,600 rpm/405 lb.-ft. @ 3,600 rpm
  • Aluminum Cylinder Heads
  • Hydraulic Roller Camshaft
  • Cast Steel Crankshaft
  • Forged Pistons

What’s Included

  • Handpicked seasoned block – square and parallel decked
  • Align honed main bearing bore
  • New BluePrint cast steel hydraulic roller crankshaft
  • Cylinders honed to within .0002 straightness and roundness
  • Aluminum heads
  • Valve covers
  • Brass freeze plugs
  • Painted oil pan
  • Dyno test results shipped with each engine

Important Notes

  • Not for use in pollution-controlled vehicles.
  • *A bronze distributor gear is NOT recommended on this engine
  • This engine is not compatible with factory fuel injection.
  • Engine timing cover is designed for standard rotation water pump ONLY.

347CI Stroker Crate Engine Tech Specs

  • P/N: BPEBP3474CT
  • Power: 415 hp / 415 lb.-ft. torque
  • Engine Type: Ford Small-Block V-8
  • Displacement (cu. in.): 347
  • Bore x Stroke (in.): 4.000 (bored .040 over) x 3.400
  • Block: Cast-iron with 2-bolt main
  • Crankshaft: New BluePrint cast steel crankshaft
  • Connecting Rods: Forged I-beam 5.400″ connecting rods
  • Pistons: Forged pistons
  • Intake Manifold: Dual plane (P/N 12366573)
  • Camshaft Type: Hydraulic roller
  • Valve Lift (in): .543 intake / .554 exhaust
  • Camshaft Duration: 218° intake / 226° exhaust
  • Cylinder Heads: BluePrint aluminum cylinder heads -HP9008
  • Valve Size (in): 2.02″ intake/1.60″ exhaust
  • Compression Ratio: 10.0:1
  • Ignition Timing: 34 Degrees Total at 3500 RPM
  • Balanced: 28oz External

30 month / 50,000 miles

Prop65WARNING: These auto parts can expose you to chemicals including phthalates and lead. Installing or using these parts can expose you to other parts containing these chemicals and to engine exhaust, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to