MSD 8445 Pro-Billet Cap-A-Dapt With Fixed Rotor
$81.95
- Male/HEI Terminals
- For MSDPro-Billet Distributors
- Will Not Fit Ford FE 8594
The MSD Cap-A-Dapt adapts a large, Ford style cap onto your MSD distributor. This large cap spaces the spark plug terminals farther apart which lessens the chances of cross-fire and ionization occurring. The rotor is injection molded out of Rynite® for incredible strength and resistance to spark. Thick vanes are incorporated to stir up the air in the cap for even more ionization prevention. Three Cap-A-Dapts are available; two with a fixed rotor and another with an adjustable, two-piece rotor. The two-piece rotor allows you to adjust the rotor tip to cap terminal alignment so you can adjust the rotor phasing. All of the MSD Distributors are phased at the factory, but if you are running a Multi-Step Retard or Timing Controller, having the ability to adjust the rotor phasing is beneficial. The Cap-A-Dapts will install on most MSD Pro-Billet Distributors (except the Ford FE, PN 8594). Both kits are supplied with a high quality cap with brass terminals, rotor and cap spacer.
| Weight | 1.15 lbs |
|---|---|
| Dimensions | 6 × 5.5 × 5.4 in |
| GTIN | 85132084456 |
| Brand | |
| Manufacturer Part Number | 8445 |
MSD Cap-A-Dapt
WARNING: These auto parts can expose you to chemicals including phthalates and lead. Installing or using these parts can expose you to other parts containing these chemicals and to engine exhaust, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.