Sale!

DRCE 3 Bare Block, Compacted Graphite

$8,643.22

Chevrolet Performance Big Block DRCE (Drag Racing Competition Engine) blocks are the foundation of many of the most powerful Pro Stock drag racing engines. The DRCE family of engine blocks was specifically designed with 500-cubic-inch Pro Stock engines in mind. They are the latest evolution of Pro Stock engine design. In order to build optimum performance, the DRCE blocks have bore spacing that allows for the preferable big bore/short-stroke crankshaft combination. The camshaft has been raised and the distributor moved.

The big-bore design un-shrouds the heads, which means bigger valves can be used. The result is maximized air/fuel mixtures. All DRCE blocks are sold solid, without lifter holes or head bolt holes, so any GM Big Block cylinder heads may be used. The DRCE blocks are available in either gray iron or compacted graphite (an extremely high-strength material that helps the block combat bore distortion and crank deflection under stress).

25534406 Chevrolet Engine Block

  • CNC-machined compacted graphite material 4-bolt block
  • 9.250deck height, may be machined to 9.000″
  • Camshaft raised to 7.067″
  • Cam tunnel accommodates (9) 60mm cam bearings
  • Cam tunnel is closed (no oil drain to rotating assembly)
  • 4.590semi-finished bore
  • 4.700″ max bore
  • 2.500″ crankshaft main journal
  • 4-bolt steel doweled-after-assembly main caps, 22° splayed-on center three mains
  • Highest-available quality main studs
  • Oil pan rails spread to 12″
  • Oil and water plugs are AN O-ring-style
  • Tested to 1,400-plus horsepower!

DRCE Block Technical Notes:

  • CNC-machined to +/- 0.001″ tolerance
  • Siamese cylinder bores with 4.900″ spacing
  • No lifter bosses, solid bar can be drilled as required
  • No head bolt holes
  • Numbers two and four main bearing bulkheads moved 0.060″
  • Bellhousing bolt pattern accommodates Chevy and Pontiac/Olds transmissions
  • Uses Big-Block Chevrolet crank, camshaft, balancer, flywheel and water pump
  • Requires camshaft with distributor gear behind rear bearing
  • Priority main oiling dry-sump system
  • Dual starter mounting locations
  • Front-engine mounts only
  • Each block is supplied with sonic test data sheet

Note: Compacted graphite is an extremely high strength material that helps the block combat bore distortion and crank deflection under heavy loads -like making 1400-plus horsepower at 10,000 rpm!

 

Shipping is free, but there is a delivery fee for residential addresses.

DRCE 3 Bare Block – Compacted Graphite

Chevrolet Performance Big Block DRCE (Drag Racing Competition Engine) blocks are the foundation of many of the most powerful Pro Stock drag racing engines. The DRCE family of engine blocks was specifically designed with 500-cubic-inch Pro Stock engines in mind. They are the latest evolution of Pro Stock engine design. In order to build optimum performance, the DRCE blocks have bore spacing that allows for the preferable big bore/short-stroke crankshaft combination. The camshaft has been raised and the distributor moved.

The big-bore design un-shrouds the heads, which means bigger valves can be used. The result is maximized air/fuel mixtures. All DRCE blocks are sold solid, without lifter holes or head bolt holes, so any GM Big Block cylinder heads may be used. The DRCE blocks are available in either gray iron or compacted graphite (an extremely high-strength material that helps the block combat bore distortion and crank deflection under stress).

25534406 Chevrolet Engine Block

  • CNC-machined compacted graphite material 4-bolt block
  • 9.250deck height, may be machined to 9.000″
  • Camshaft raised to 7.067″
  • Cam tunnel accommodates (9) 60mm cam bearings
  • Cam tunnel is closed (no oil drain to rotating assembly)
  • 4.590semi-finished bore
  • 4.700″ max bore
  • 2.500″ crankshaft main journal
  • 4-bolt steel doweled-after-assembly main caps, 22° splayed-on center three mains
  • Highest-available quality main studs
  • Oil pan rails spread to 12″
  • Oil and water plugs are AN O-ring-style
  • Tested to 1,400-plus horsepower!

DRCE Block Technical Notes:

  • CNC-machined to +/- 0.001″ tolerance
  • Siamese cylinder bores with 4.900″ spacing
  • No lifter bosses, solid bar can be drilled as required
  • No head bolt holes
  • Numbers two and four main bearing bulkheads moved 0.060″
  • Bellhousing bolt pattern accommodates Chevy and Pontiac/Olds transmissions
  • Uses Big-Block Chevrolet crank, camshaft, balancer, flywheel and water pump
  • Requires camshaft with distributor gear behind rear bearing
  • Priority main oiling dry-sump system
  • Dual starter mounting locations
  • Front-engine mounts only
  • Each block is supplied with sonic test data sheet

Note: Compacted graphite is an extremely high strength material that helps the block combat bore distortion and crank deflection under heavy loads -like making 1400-plus horsepower at 10,000 rpm!

Weight 250 lbs
Brand

Reviews

There are no reviews yet.

Be the first to review “DRCE 3 Bare Block, Compacted Graphite”
Prop65WARNING: These auto parts can expose you to chemicals including phthalates and lead. Installing or using these parts can expose you to other parts containing these chemicals and to engine exhaust, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.